FW: wndr3400 tomato firmware

BE WARNED! This is highly beta tomato version. This image may brick your router. Make sure you have serial cable to debrick router!!

Netgear WNDR3400 v1:
- CPU BMC4716 453MHz
- 64MB RAM
- 8MB flash
- 64KB NVRAM
- dualband
- fast ethernet switch
- one USB port

Tomato:


Image: http://tomato.groov.pl/download/K26/testing/WNDR3400v1/tomato-Netgear-3400v1-K26USB-1.28.RT-101.chk

Original image: http://tomato.groov.pl/download/K26/testing/WNDR3400v1/WNDR3400-V1.0.0.50_20.0.59-OFW.chk

How to flash tomato:
1) restore default settings
2) flash using tomato image via GUI
3) after flash leave router for 5-7 minutes until ping 192.168.1.1 will return
4) log into Tomato and first of all erase nvram!!
5) after erase 2nd radio will disapear. Dont panic Just make reboot one more time
6) log into tomato and Have fun

Support details:
- both radios works
- usb works
- power led and usb led works correct
- wps and reset buttons works
- VLANs are not supported yet
- wireless leds may not work correct
- upgrade router via GUI will brick router!!

How to revert to OFW:
- flash ofw image via GUI
- after flash router wuill brick and power led will blink green light
- flash ofw image one more time using tftp client
- after flash make 30-30-30 reset

Best Regards!

shibby20, Sep 13, 2012